Electronic Hand Throttle
Includes EHT 200 Series, EHT 250 & EHT 300

Have variable idle speed control at your fingertips. This device provides a type of off road cruise control and is the solution for accelerator pedal bouncing and lurching caused by rocky terrain. Setting the RPMs below factory set level (models 200-250)allows you to decrease speed on downhill descends, reducing the need for heavy braking.  It also eliminates high idle problems associated with automatic transmissions, a common issue with newer Jeeps. The unit provides increased power support for winches.air compressors and welders. Have variable RPM control by installing this simple-to-use device.

 
[click on picture for full size view]

EHT 200 Series
Priced from $229.95 plus S/H and applicable sales tax

Applications:

• Chevy/GM 1987 to present with fuel injection engines
• Jeep/Chrysler 1987 to present fuel injection engines
• Mopar, Howeel and most other aftermarket fuel injection systems

__________________________________________________________________

EHT 250
Priced from $259.95 plus S/H and applicable sales tax

Applications:

• Jeep 2005-2006 TJ
  
  __________________________________________________________________

EHT 300
Priced from $284.95 plus S/H and applicable sales tax

Applications:

• 2007 and newer Jeep JK

The Electronic Hand Throttle bypasses the computer and lets you increase the idle speed to as high as 3000 RPM. The unit is controlled by two simple switches; a power switch and an RPM up/down lever. The light on the box indicates that your EHT is providing you manual control over engine RPMs. To return to computer control, simply turn off the power switch to the control box.

Common Uses:

• Rock Crawling
  Cruise control for off road driving; you have speed control at your fingertips. Setting the RPM level to the desired setting allows you to keep your foot off the accelerator to eliminate gas pedal bouncing. Setting the RPM below the factory set level will dramatically decrease speeds when traveling  downhill, and also eliminate high idle problems associated with automatic transmissions.   
• Winching
  Setting the idle speed to 1500 RPM allows you to concentrate on winching and use your right foot to apply the brake, if needed, while your alternator supplies sufficient current.
• Running air compressors
  Adjust the idle speed to approximately 1250 RPM and your mechanical or electric air compressor will supply sufficient air pressure and flow to air up tires or blow dust from your vehicle.
• Welders
  Adjust the idle speed to the desired level and your alternator will supply sufficient current for the welding unit.

Send mail to info@offroadengineering.com with questions or comments about this web site.
Copyright © 1999-2005 Off Road Engineering LLC